Length

Three-coordinated measuring machine + laser scanner

DEA Global Performance 9.15.8 for measuring of general areas included point shooting, continuous scan or laser scan.

Measuring machine allows basic measurement of external and internal gearing.

  • Extent X [ mm ] 900
  • Extent Y [ mm ] 1500
  • Extemt Z [ mm ] 800                 

 

Measurement error in accordance with ISO / IEC 10360-2
Leitz LSP- X1

  • MPEE max. measurements default (1.8 + L/333 ) micron
  • MPEP  mistake of 1.8 micron scan
  • MPE- THP error scanning with 2.9 μm/68
  • The laser probe scan CMS106 ± 20 micron

 

Measuring SW PC- V2013 DMISTM CAD + + for geometric measurements with direct links to CAD / CAM
SW Test Gear 2.5 for measuring the basic parameters of external and internal gearing is fully compatible with PC- DMIS software

 

Optical 3D CNC measuring device

Model Optiv Classic 321GL , PCDMIS Vision for contactless measurement with high precision CCD camera for capturing,

Bottom LED backlight, coaxial top lighting, LED lighting upper segment

Minimum measuring range:

  •  X axis [ mm ] 300
  •  Y -axis [ mm ] 150
  •  Z axis [ mm ] 130

 

Accuracy of measurement - linear optical measurement uncertainty according to ISO 10360-7

  • E1x , y ± (1.6 + L/250 ) micron
  • E2x , y ± (2.0 + L/250 ) micron
  • E1z ± (3.9 + L/250 ) micron

 

Measuring SW PC- DMIS Vision

Universal digital measuring instrument

Laboratory length measuring instrument TRIMOS Labconcept Premium 1000B for measuring internal and external dimensions with high accuracy.

Equipped with a wide variety of accessories allow inspection of all types of instruments.

  • Scope - outside measurement 0 to 1000 mm            
        - Internal measurements from 1 mm
  • Accuracy ± ( 0.15 + L ( mm) / 2000) micron

Measuring SW WinDHI for all measurement functions

Hommel - roundness Etamic roundcan 555 HR -set

To measure the roundness and all parameters deviations of form and position , including the evaluation of cone-shaped in CNC mode.

Measuring ranges:

  • Measuring height 550 mm
  • Measuring diameter of 390 mm
  • Max. diameter of testing piece 740 mm

Accuracy:

  • Roundness 0.02 + 0.0005 micron height measurement
  • Axial run out 0.03 + 0.0005 micron / mm measured radius
  • Z -axis straightness deviation of 0.25 mm μm/100
  • R axis straightness deviation of 0.15 mm μm/100

 TURBO FORM evaluation software for Windows

Profilemeter, Surface Roughness Tester Hommel T8000 RC - Etamic 120-400

Roughness and contour of the external and internal surfaces .
Measuring SW TURBO WAVE for evaluation profile.
Measuring SW TURBO WAVE for evaluation of surface roughness parameters.

Measuring ranges:

  • Max . displacement in Z-axis 400 mm
  • The path X axis 100 mm
  • Lifting straps measuring 230 mm min 50 mm
  • Shifting speed in the evaluation of 0.0 to 2.0 mm / s by 0.01 mm / s

 Measuring SW TURBO WAVE for evaluation profile :

  • Calculating of angles, shapes, sizes, radius, distances in any order
  • Tilt compensation hangers and radius stylus
  • Possibility of comparing the measured profile CAD

Measuring SW TURBO WAVE for evaluation of roughness parameters:

  • Calculation of the actual roughness parameters according to standards

Digital Micrometer SUPERBORE

For accurate measurement of small diameters with evaluation using digital imaging .
Units D100S enabling a digital display of measured values ​​, input and evaluation of tolerance , statistical evaluation of measurement etc.
DC power supply Agilent 6680 .
Power DC power supply with variable output voltage 0-5 V DC output current from 0 to 875 A

Parameters:

  • Measuring range 2-6 mm
  • Resolution 0.000 1 mm
  • The accuracy of 0.001 mm